Does the audio cable have a big impact on the sound? It must be very large, otherwise there will not be many audiophile audio cables with different grades than speaker cables, and many people will not consume expensive cables. If you know or understand the working principle of the audio cable in the audio equipment system. You will understand that the audio cable plays an indispensable role in its audio equipment, regardless of the material of the audio cable, there will be a demand, it is related to the configuration of the respective audio system.
If your audio equipment is inherently Hi-end, choose an audio cable with a noble sound. If your audio equipment is really good, then combine your spending power and choose your favorite sound effects. But it is best to choose after listening to it. Don't blindly choose or listen to it, but choose the most suitable audio equipment for you.
The material of the audio cable has a great influence on the sound, just like the wires of home improvement. If pure copper and copper-clad aluminum are used, the gap is obvious. So the choice of material is still very important. And a really good sound or a good-sounding audio cable should not be too long. Too long will also lose or cause noise on the signal path, as well as many problems such as signal attenuation. Regardless of whether the audio line is in the process of transmission or reception, it is best to keep it in a noise-free state.
How to distinguish between inferior and high-quality audio cables, as long as you do a comparative audition, you will know the difference between the two. Audio is actually related to the structure of the cable, the purity of copper, silver and gold. Specifically, we will not discuss whether the audio cable is useful or not. It is the same as a speaker. A speaker cannot reflect all the details, so the speaker costs a few yuan to several hundred thousand yuan, and there are various types of speakers. The same is true for the audio cable, with good high frequency extension, less burr, good sibilance control, rich detail performance, good transient effect, great dynamics, overall balance, proper shrinkage, prominent vocal graininess, and harmonious sound between warm and cold. , The sound texture is restored to the real, on the contrary, some of the above performances are extremely poor.
So choose a good pair of audio cables to audition, and you will not regret it later. OFC: Oxygen-free copper, with a general purity of about 99.97%, is also the minimum standard for audio cables. Hi-OFC high conductivity oxygen-free copper increases the purity of copper to more than 99.99%, making the electrical conductivity better. OCC: Single crystal oxygen-free copper, which can be produced up to 100 meters in the production of single crystal copper. Single crystal oxygen copper eliminates the influence of crystal boundaries and oxides on signal distortion. The distinction of value is also the distinction of sound.
